Thermostat - Fakir Hobby Bedienungsanleitung

Thermostat

Assembly
The removable base [D] is used as the wall holder if
the fan heater is to be wall-mounted (for example in
the bathroom). The fan heater engages securely in
this holder. Simply pushing the release button permits
removal of the fan heater for attachment elsewhere
whenever, problem-free and without the base.
If you want to mount the fan heater on the wall:
• Select a spot near a socket, but not directly under-
neath it,and ensure the minimum distances from
the wall and from the ceiling and/or floor.
• To fit the wall holder, hold it against the wall at the
intended spot with the release button upwards,
and mark the positions of the fastening holes with
a sharp pencil.
• Ensure that the holder is horizontal and that the
holes are clear of electric cables and pipes.
• Drill the holes at the marked points and insert
plastic pougs. Then screw the wall holder in tight
(release button upwards).
• Slide the fan heater (while holding it vertical) into
the wall holder by its rear face until it can be heard
to engage. To remove the fan heater, press the
release button while pulling the heater forwards.
ATTENTION!
When fitting the base as the wall holder, ensure
that no curtains, towels or other inflammable objects
can be hung in front of the fan heater later
on. This could cause overheating.
13