Important Remark; Warnings; Introduction; Connections - Ecler ePHS20T Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

1. IMPORTANT REMARK

Congratulations! You are the owner of a carefully designed and manufactured equipment.

Thank you for choosing our ePHS20T exponential horn.

In order to get the optimum operation and efficiency from this unit, it is VERY IMPORTANT

- before you plug anything - to read this manual very carefully and bear in mind all considerations

specified within it. We strongly recommend that its maintenance be carried out by our Authorized

Technical services.

Avoid placing the unit next to heat sources such as spotlights or heaters.

ePHS20T exponential horn is capable of producing sound pressure levels that can damage

human hearing. Protect your ears if you work near this unit. Do not open it during operation.

ePHS20T unit is specially designed for background music and announcement PA systems

requiring high power, very high performance and a frequency response adapted to speech

reproduction in sound reinforcement general applications.

Waterproof (IP56), it is suitable to use outdoor. It is made of ABS plastic, in RAL 7044

colour.

In order to always obtain optimal output use the appropriate voltage and power.

Power selection is performed by a switch at the back of the unit. Use a suitable

screwdriver or equivalent tool to make the adjustment.

Once the right power is selected for the application and line voltage, the horn is ready to

be used. If the speaker is accidentally connected to a 100V line in the 8Ω position, it will be severely

damaged.

Unit installation should be performed with fastenings designed for the type of supporting

material. To change horn position, lightly unscrew the U-shaped bracket in order to obtain the final

position you want; keep in mind the area you want to reach to set the horn correct vertical angle.

Re-tighten the mounting screws to secure the horn in its final position.

Inhaltsverzeichnis