Principle Of Operation - Aqua Medic Systemfilter Skim Bedienungsanleitung

5.5. Principle of operation

The aquarium water is pumped to the skimmer using a separate pump (not included) which should
have a capacity of approx. 7,500 - 15,000 litres/hour. Inlet and outlet ports are arranged that way
that the air bubbles have the maximum contact time in the counter-current.
The venturi pump draws water from the skimmer and mixes it with air in the venturi nozzle. The
air/water mixture is pumped back into the skimmer. The treated water flows out of the bottom of the
skimmer and is pumped through the outlet pipe positioned outside the skimmer, back into the
aquarium or filter sump.
17
1. Reaction pipe
2. Injector
3. Injector's pump
4. Stop tap
5. Adding ozone
6. Outlet pipe D 75
7. Water outlet D 110
8. Foam cup
9. Lid
10. Adjusting tap for air inlet
11. Air flow meter (optional)
12. Tap for backflow
13. Stop tap
14. Inlet
15. Discharge tap foam cup
16. Dicharge pump
17. Discharge of
remains
18. Ventilation
the skimmer's