Overview Of The Remote Control Buttons - Sony WEGA KLV-30MR1 Bedienungsanleitung

Overview of the Remote Control Buttons

VIDEO
OK
PROG
MENU
Buttons
f a) If the Media Selector is
switched to TV:
b) If the Media Selector is
switched to VCR:
g a) If the Media Selector is
switched to VCR or DVD:
b) If the Media Selector is
switched to TV:
h Switching off the picture:
i Displaying the clock:
j This button works in Teletext mode and is also used for programming the remote control to operate
the VCR and DVD.
16
Overview
TV
Buttons
a To Temporarily
Switch Off TV:
b VCR or DVD on/
off:
c Selecting input
source:
d Displaying the
Memory Stick
Home ("Memory
Stick" picture
viewer):
e Selecting
channels:
Description
Press this button to watch the last channel selected (the last channel
watched for at least 5 seconds).
For Sony's VCR double-digit programme numbers, e.g. 23, press
-/- - first and then the buttons 2 and 3.
Press this button to record programmes.
Press this button for at least 3 seconds to return the picture and sound to the
factory settings. This will also return the set to the install condition.
Press this button to switch off the picture. Only the picture is switched off;
the sound remains on. Press again to cancel.
Press this button to display the clock on the TV screen. Press again to turns
the clock display off.
The clock display turns off automatically 5 minutes after it is
turned on.
Description
Press this button to temporarily switch off the TV
(the (power on/standby) indicators on the
display unit and the media receiver unit light up in
red). Press again to switch on the TV from standby
mode.
To save energy we recommend switching the TV
off completely when the TV is not in use.
After a certain period without a signal and
without any button being pressed, the TV
automatically switches into standby mode
(Auto Shutoff, page 41).
Press this button to switch your VCR or DVD on
or off.
Press this button repeatedly until the desired input
symbol of the source appears on the TV screen.
Press this button to display the Memory Stick
Home ("Memory Stick" picture viewer). For more
details, refer to "Using the Memory Stick Home"
on page 50.
Press this button to select channels.
For double-digit programme numbers, enter the
second digit within 2.5 seconds.