Operation; Cleaning And Maintenance; Technical Specifications - Eurolite Rubberlight Led Rl1-230V Benutzerhandbuch

How to connect the tube to the power supply:
Connect the device to the mains with the power-plug. Make sure that the outlet is in a dry area.
How to connect a controller:
Connect the power cord with your controller.
After the installation, the power supply cable, the plug and the connector must be free of any tractive forces
and rotary forces.
The lighting chain must never be covered with any object.

OPERATION

After you connected the lighting chain to the mains, the LEDs start burning.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
There are no serviceable parts inside the device. If defective, please dispose of the unusable lighting chain
in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
LEDs/tube:
LED-distance:
Tube-diameter:
Weight:
Accessories:
RUBBERLIGHT Mounting clip 50 pieces
LED RUBBERLIGHT 1-ch.connector with plug
RUBBERLIGHT end cap
RUBBERLIGHT 1-channel T-piece connector
RUBBERLIGHT 1-channel X-connector
Self adhesive mounting w/ tie strap 10pcs
180cm installation channel f. RUBBERLIGHT
Please note: Every information is subject to change without prior notice. 24.01.2013 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
:
a
(steady state):
C
230 V AC, 50 Hz ~
max. 30 W
45° C
60° C
0.5 m
0.1 m
324
27 mm
13 mm
1.5 kg
No.
50510100
50506300
50510120
50510130
50510135
50510150
50510170
8/8 00074430.DOC, Version 1.3