Cleaning And Storage - DS Produkte Z 08115 Gebrauchsanleitung

EN
Chopping Up / Blending Food
1. Place the motor unit on a dry, even and fi rm surface. You may wish to place a non-
slip mat underneath the motor unit so that the surface is not damaged.
2. Pour the ingredients you want into the shaker of your choice.
9. Clean the blade attachment immediately after use so that no food residues dry on.

Cleaning and Storage

CAUTION!
■ Remove the mains plug from the plug socket before cleaning the device!
■ Never immerse the motor unit in water or other liquids! Ensure that the motor unit,
cable or plug do not fall into water or become wet.
■ Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface.
1. Clean the accessories which have been used with clear, warm water and some mild
detergent. The accessories can also be cleaned in the dishwasher, but not the mo-
tor unit (!).
2. Only wipe the motor unit with a slightly damp cloth and then dry it thoroughly.
3. Allow all parts to dry completely before assembling the device again and/or putting
it away for storage.
4. Store the device in a dry, clean place that is not accessible to children and animals.
16
3. As required, pick up the cross-blade or fl at-blade attach-
ment, make sure that the sealing ring is correctly in place
(see the "Use" chapter, "Checking the Fit of the Sealing
Rings" section), and screw the blade attachment onto the
shaker.
4. Insert the blade attachment into the motor unit. Make sure
that the locking lugs on the shaker rest correctly in the
recesses of the motor unit.
5. Insert the mains plug into a properly installed mains sock-
et that is easily accessible.
6. To switch on the device, press the shaker down slightly
and at the same time turn it clockwise until it engages.
Always keep hold of the device with at least one hand
while preparing food.
7. To switch off the device, turn the shaker anticlockwise
again until you feel some resistance. Always wait until the
blades have come to a complete standstill before you take
off the shaker.
8. Turn over the shaker and remove the mains plug from the
mains socke. Carefully unscrew the blade attachment. If
you want to use one of the lids supplied, screw it onto the
shaker. With the sports and keep-fresh lid, make sure
that the sealing ring is inserted correctly.