Storage And Transport - Heat Tech Vest Benutzerhandbuch

WARNING! Do not attempt to repair any electrical Vest part or component. This will void the
warranty and can result in high temperature malfunctions, which may cause mi-
nor to severe burning.

10. STORAGE AND TRANSPORT

When not in use, store the cleaned Vest in a clean, dust-free environment at room temperature (15-25°C
/ 59 – 77 °F). Ensure that the Vest is completely dry before storing. To prevent mildew or other degradation
to the Vest, store in a dry and well-ventilated area. Do not store inside a sealed bag or container, or
underneath heavy objects.
Store the Vest with the battery (6) disconnected.
When storing the Vest and its components, do not store in places that will expose the Vest and its
components to extreme heat sources such as fires or flames and neither to extreme cold sources that could
result in the Vest or its components from freezing.
It is also recommended to fully charge the batteries before storing for extended periods of time.
When handling the Vest be careful not to drop or in any manner cut, tear or pierce the Vest. Protect the Vest
against sharp objects.
Similarly, when transporting the Vest, the above care should be taken and in particular not to place heavy
objects on the Vest that can bend or crease the Vest shape.
11. DISPOSAL OF THE VEST AT THE END OF THEIR LIFE SPAN
At the end of your Vest lifespan be sure to dispose of it following your local/national refuse regulations and
dispose it in an appropriate manner.
To dispose of the Vest in the appropriate manner, at the end of your Vest life span follow your local/ national
refuse regulations.
Moreover, as the Vest contains electronic components, the Vest must be disposed of in accordance with the
appropriate legislative or environmental measures adopted by the public waste disposal services, operating
in your territory, for electronic components. A correct waste disposal of the Vest will favour the reuse,
recycle or disposal of the materials from which the Vest and electronic components are made of. Thereby
allowing for the most environmentally friendly recycling or appropriate waste processing of the Vest,
limiting any negative impacts on the environment and risks to human health.
For Europe, the European Directive 2012/19/EU requirements apply. The symbol of the crossed bin displayed
on the battery (6) and on the Wall Charger (9) indicates the electronic components of the Vest which, at the
end of their life span, must be separately disposed from other waste, for appropriate waste processing and
recycling. The user must therefore take the battery (6), Wall Charger (9) and all other electronic components
marked with the crossed bin, to those waste disposal sites assigned for the disposal of electrical and
electronic waste or return the Vest to an Alpinestars Authorized Dealer for disposal in accordance with the
local waste requirements. The unauthorized disposal of the Vest on behalf of the rider, entails the application
of fines pursuant to the current European laws.
12 EN