Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 Description
The DMX-192PLAY is a DMX stand-alone unit. The scenes created in the PC can be
loaded into the unit by USB. The scenes loaded can be reproduced without PC. The
scenes are selected via 3 buttons. It is also possible to use the DMX-192PLAY for live
application with connected PC.
Due to the easy operation the DMX-192PLAY can also be used for decoration and
presentation purposes.
IR_IN
DECODER
PROGRAM
SWITCH
CONTROL
CONTROL
2 Safety Notes
The units (DMX signal recorder/player and power supply unit) correspond to all relevant
directives of the EU and are therefore marked with
WARNING The power supply unit is supplied with hazardous mains
voltage. Leave servicing to skilled personnel only. Inexpert handling or
modification of the unit may cause an electric shock hazard.
It is essential to observe the following items:
•
The units are suitable for indoor use only. Protect them against dripping water and
splash water, high air humidity and heat (admissible ambient temperature range
0 – 40 °C).
•
Immediately disconnect the power supply unit from the socket
1. if there is visible damage to one of the units,
2. if a defect might have occurred after a drop or similar accident,
3. if malfunctions occur.
The units must in any case be repaired by skilled personnel.
•
For cleaning only use a dry, soft cloth, never use chemicals or water.
•
No guarantee claims for the units and no liability for any resulting personal damage
or material damage will be accepted if the units are used for other purposes than
originally intended, if they are not correctly connected or operated, or not repaired in
an expert way.
If the units are to be put out of operation definitively, take them to a local recycling
plant for a disposal which is not harmful to the environment.
DMX-192PLAY
IR
POWER
CONTROL
RISC
CONTROLLER
CLOCK and
RESET
MEMORY
DMX
DMX-OUT
INTERFACE
.
9
Werbung
Inhaltsverzeichnis
