Handle and installation
Handle with care
Unplug the wall socket first. Never tilt it over 45 degree during handling.
Dry place
Always locate the refrigerator at a dry place.
Sufficient space
The distance from both sides and back of refrigerator to wall or other substance must be
less than 10cm. The refrigeration capability might be decreased if its surround space is too
small to circulate air.
Well ventilated
Always locate the refrigerator at a place with good ventilation. For the first time use, wait
for 2 hours after handling and then plug the wall socket and start it.
Far from heat source
Never from place heat the source refrigerator directly under the sunshine
Never locate it nearby the any heat source to prevent capability it from reducing
refrigeration capability.
Do not punch holes
Never make holes on the refrigerator. Never install other matter on the refrigerator.
No heavy load
Never put any heavy load on the top of the refrigerator.
Stable location
Unpacking and locate the refrigerator on a flat and solid place.