Structure Of Rsp Easy - Cito Rsp Easy Betriebsanleitung

1. Structure of RSP Easy

QV1.0
34
Operating Manual
1. Base blanket using the reduced millimetre scale (Fig. 1)
Functions:
Packing for the tooling of the RSP inline finishing form with processing rules and/or
flexible dies.
Mounting of the RSP inline finishing form with positioning accuracy outside the
press by the circumferentially reduced millimetre scale.
a. Dimensionally stable plastic blanket
b. Clamping bars
c. Millimetre scale (circumferentially reduced)
d. Marking of the gripper margin on the print start side
e. Processing start marking for the alignment of the base blanket with the print start
line of blanket cylinder.
2. Protective impression cylinder jacket (Fig. 2)
Function: Protection of the impression cylinder
Stainless steel
Laminated with special self-adhesive film
Residue-free removal from the impression cylinder after finishing
Availability:
Press type Impression cylinder surface
without perfecting Chrome
with perfecting Mark 3 (roughened surface)
PerfectJacket or similar sur-
face
b
c a
e
d
1
e
1
Type of impression cylinder
jacket
without perfecting
with perfecting
no protective impression cyl-
inder jacket available
2