Foreword; Basic Safety Instructions; Manufacturer's Address - Cito Rsp Easy Betriebsanleitung

Foreword

With RSP Easy from CITO-System
GmbH, your printing press is expanded
easily and cost-effectively into a genuine
finishing system.
Creasing, diecutting and perforating is
enabled, without an additional machine,
without additional personnel and with-
out long set-up times.
Validity
All the information in the operating
instructions corresponds to the version
of RSP Easy at the time of publication
(April, 2011).
We reserve the right to make chang-
es for the purpose of technical progress.
In the event of questions, please contact
CITO System GmbH.
Trademark
RSP is internationally patented.
WARNING
The RSP Easy Set may only be used with
original accessories.
Before the commissioning of RSP Easy on
the printing press, please read the oper-
ating instructions. Keep the operating
instructions available to the operators of
the press at all times.
a CITO GROUP Company
Cleaning the RSP Easy
We recommend blanket wash for clean-
ing the base blanket.
We recommend blanket wash for remov-
ing adhesive residues from the base blan-
ket.

Manufacturer's address:

CITO-SYSTEM GmbH
Haimendorfer Straße 37+46
90571 Schwaig bei Nürnberg
Germany
Phone +49 911 95885-0
Fax +49 911 95885-50
info@cito.de
www.cito.de
33
Operating Manual