Burda M1 Installations- Und Betriebs-Anleitung Seite 6

I -
NSTALLATION AND OPERATING INSTRUCTIONS
Dear customer,
Please read the following information carefully before
using the appliance for the first time for your own
safety
and to ensure correct use.
D :
ESIGNATED USE
Outdoor areas.
S
AFETY INFORMATION
• The instruction belongs to the appliance and must
be kept in a safe place. When changing owners the
instruction must be forwarded to the new owner.
• The waterproof appliance must be used only in a
way described in the instruction and can be used
outdoors.
• Only connect the appliance to a properly installed
socket-outlet with earthing contact. Possibly a
slow-blow C fuse is necessary if you experience
problems by switching on to overloaded fuses.
• The appliance is not intended for using in animal
farming and rearing.
• Do not use the appliance in flammable and
combustible atmospheres.
• Connect the appliance only to an alternating
current voltage as specified on the rating plate.
• The appliance should be connected to the mains
only by a qualified electrician and according to
the current and local regulations referring to
electrical installation.
• The producer provides a supply cable at
parameters appropriate for its connection with the
appliance.
• The appliance is not intended for using by young
children or infirm persons without supervision!
Young children should be supervised to ensure that
they do not play with the appliance.
• The socket-outlet must be accessible at all times
to enable the mains plug to be disconnected as
quickly as possible!
• In the supply installation of the unit must be an
off-switch which enables to disconnect immediately
the appliance from the supply mains, on all phases
• The supply cable should be placed in such a way,
which prevents it from damage or tripping over.
• In case of cable damage during operating of the
appliance the unit should be immediately
disconnected from power and notified to a q
ualified electrician for repair.
• Any liability and guarantee of the producer
expires in case of damages caused by improper
use and assembly or lack of obedience of safety
regulations.
• In places where the device is exposed to the wind
should be paid particular attention to the strength
of the elements on which to hang the module.
For the safety of the user, the profile on which you
want to fix the device should withstand a load of
80kg.
• After switching the appliance on for the first time
and following extended periods, the appliance
can smell slightly burned for a short time.
• Never touch the heating elements during
operation of the appliance and after switching it
off within 10 minutes. Risk of burns!
• After operating period the appliance must be
utilized according to appropriate regulations.
C
LEANING
• Disconnect the appliance from the power supply
system before commencing cleaning.
• Do not use any abrasive or caustic cleaning
agents.
• Clean with soft, moistened lint. Using gentle
cleaning agents or use vacuum cleaner.
• Do not touch the emitters with bare fingers since
the deposited grease cause premature failure of
the element. If it happens, clean the quartz with a
soft cloth moistened with alcohol. Do not use
denatured or spirit salicylic.
L
OCATION
• The radiating element is designed for wall and
ceiling type operation with permanent connection
and must be installed at least 1,8m above the
ground.
• The appliance should only be used mounted
horizontally or vertical on a wall or ceiling.
• A minimum distance 150cm must be maintained
between the heater and the ceiling. The distance
between heater and Wall should at least be
1 meter.
• The appliance must not be mounted directly on
flammable materials (no wood).
• The appliance should never be placed nor
mounted directly under a wall socket!
• As the appliance radiates heat, no objects such
as furniture should be placed between the
appliance and the person using the appliance!
• The heater should never be installed face down
GB