Technical Data - Laserliner Inspectorcamera 3D Micro 1M Handbuch

Technical data

Camera head diameter
Camera probe protection class
Number of LED lights
Camera resolution
Field of view (FOV)
Depth of focus (DOF)
Probe diameter
Probe length
Length camera head
Probe min. bending radius
Features
Operating conditions
Storage conditions
Weight
Dimensions (W x H x D)
EU and UK directives and disposal
This device complies with all necessary standards for the free movement of goods
within the EU and the UK.
This product, including accessories and packaging, is an electrical appliance that must be recycled
in an environmentally appropriate manner in accordance with European and UK directives on waste
electrical and electronic equipment, batteries and packaging, in order to recover valuable raw materials.
Electrical devices and packaging do not belong in household waste. Look for information on local
disposal facilities and note the relevant disposal and safety information at the collection points.
Further safety and supplementary notices at:
https://packd.li/ll/aql/in
InspectorCamera 3D Micro 1m
3.9 mm
IP 67 (immersion depth 1 m, 30 min.)
6
960 x 720 pixel
120°
3 ... 10 cm
3.9 mm
1 m
14 mm
35 mm
Resistant to diesel, petrol, engine oil (approx. 5 minutes)
-20°C ... 70°C, max. humidity 85% rH, no condensation,
max. working altitude 2000 m above sea level
-20°C ... 60°C, max. humidity 85% rH
130 g
1150 mm x 44 mm x 44 mm
Subject to technical alterations. 24W45
09
EN