Occhio Sento letto Montageanleitung Seite 39

Sento letto up
Connected separately
Connected with through-wiring
Click!
230 V
Other
230 V luminaire
Using a screwdriver, open the flap
in the middle of the converter.
Lock the converter into the moun-
ting plate so that it is fitted flush.
At the same time, guide the ends
of the mains cable through the
converter opening.
Using long-nosed pliers, connect
the cable ends of the mains cable
to the terminals of the converter
according to the diagram.
Caution:
Before fitting, disconnect all
current-carrying lines from the
mains supply.
11