Warnings & Cautions
Indoor Use Only:
•
This light strip is designed for indoor use only and should not be used outdoors or in damp
environments.
Installation Precautions:
•
Do not install the light strip inside recessed surfaces or cover it with any material.
•
Do not bend the LEDs more than 90 degrees, as this may cause damage.
•
Always unroll the strip completely before powering it on to prevent overheating or damage.
•
Ensure proper ventilation during use.
Handling and Maintenance:
•
Do not cut, open, or modify the light strip, as this may cause permanent damage and void
the warranty.
•
Do not connect parts of this light strip with parts from other manufacturers, as compatibility
is not guaranteed.
•
Use only the supplied connectors for interconnection, and seal off any open ends before use.
•
The LED driver provided should be used exclusively with this light strip to ensure safe
operation.
Operating Conditions:
•
This product is designed to work in environments with a temperature range of 14°F to 77°F (-
10°C to 25°C).
•
The light strip is not water-resistant, so exercise caution when installing it near moisture-
prone areas.
•
Keep a minimum distance of 20 cm between the antenna and the user's body when in use.
Safety Considerations:
•
Children should not install the strip light alone—installation should be done by an adult.
•
The light source is non-replaceable; when it reaches the end of its lifespan, the entire
luminaire must be replaced.
Usage Limitation:
•
This light strip is not suitable for general indoor lighting and should be used only for
decorative purposes.
8