Sa Fet Y Functio Ns; How To Use Th E Bat Tery Packs; Use With Lenz Heat Products; Im Po Rta Nt Instructio Ns Fo R Use - Lenz Rcb 1400 Handbuch

INSTRUCTIONS FOR USE / ENGLISH
Charging time lithium pack
rcB 1400 (LZ-
PPX-060)
lithium pack
rcB 2000 (LZ-
PPX-070)
S A F E T Y F U N C T I O N S
￭ Short circuit protection: In the event of a short circuit at
the contact or the heating element, the integrated electronics
automatically turn the product off. After eliminating the
short circuit, please briefly connect the battery packs to the
Charge Box. Next, press the control button once and the
product is ready again.
Protection against overcharging and exhaustive discharge:
￭
The product is protected against overcharging and
exhaustive discharge with the integrated electronics system.
H O W TO U S E T H E B AT T E RY PAC KS

Use with Lenz heat products

￭ Remove the contact protector from the battery packs (Fig. 1.4).
￭ Place the battery packs in the intended position (see figure
A, B, C, D, E).
Push the battery packs onto the snap fasteners until they
￭
audibly lock into place (Fig. F).
The battery packs can be operated conveniently and manually,
￭
either through the visual control window or the textile (Fig. G),
or optionally via the Lenz heat app on a smartphone.
– 162 –
Normal Fa s t
c h a r g e
8 – 9 h 5 – 6 h
12 – 13 h 7 – 8 h
I M P O R TA N T I N S T R U C T I O N S FO R U S E
• When using the heated product, the optimal heating power
is only produced when all heated products, textiles and
socks you are wearing are dry.
• Do not operate the device at the highest heating power for
longer than several minutes.
• Always set the product to a low or medium heat level to
maintain a comfortably warm temperature (the heating
should be nearly unnoticeable).
F U N C T I O N A L D ES C R I P T I O N
lithium pack rcB 1400 / lithium pack rcB 2000
Manual operation:
The battery packs have three heat settings. They are indicated
by the heat setting display (Fig. 1.2) on the battery packs.
Remote control:
When using remote control via the APP, the heat output can be
set to one of 9 levels via the corresponding controls in the APP.
U S E A N D F U N C T I O N
Turning on:
Turn on the product on the lowest heat setting by briefly
pushing (approximately 0.5 seconds) the control button on
the battery pack (Fig. 1.3).
Setting the heat level:
This can be done by repeatedly pressing the control button
on the battery pack (Fig. 1.3), or using the corresponding
control in the APP when using remote control.
The respective heat level is indicated by the illumination of
the heat setting display (Fig. 1.2) on the battery pack, or in
the APP when using remote control.
low heat level
moderate heat level
high heat level
– 163 –