PICO DUO RX Gebrauchsanweisung Seite 10

Step 1 : Preparing the installation
Note : Clip'Easy lugs fit onto other Clip'Easy lugs, ensuring the ideal
3-
Step 2 : Pipe mounting
1. Place the assembled Clip'Easy
on the pipe
distance between two saddles.
Fitting the two parts together
2. Tighten by hand
The Clip'Easy collar is intended for single use only.
Instruction and user manual PICO DUO Rx controller
1- Pre-drill a Ø4 hole using the
counter-flange guide
Remove the counter-flange and
2-
drill to Ø22
3. Adjust with pliers.
Two notches remain after
tightening.
10
4- Insert the O-ring on the
support flange