Switching Off And On; Alarms And Symbols Displayed; Maintenance - Pico Duo Rx Gebrauchsanweisung

4.4

Switching off and on :

when the unit is in operation, briefly pressing the "ON/OFF" button switches the unit off.
Similarly, when the device is switched off, "OFF" is displayed. Briefly pressing the "ON/OFF" key switches
the device on. After this, the unit will begin a 15-minute pause period.

5 ALARMS AND SYMBOLS DISPLAYED:

Message
ALr
ALr
hi

6 MAINTENANCE

To preserve the quality of your device, we recommend (*) that you replace the following wearing parts:
DOSED PRODUCTS
pH and Chlorine
(*) parts replacement frequency is indicative and may vary according to operating conditions.
7.4
Meaning
pH mode: measured pH <= 5 pH
Redox mode: measurement <
100mV
pH mode: measured pH >= 9 pH
Redox mode: measurement >
900mV
Measured pH > 7.8
FRECUENCY
1year ACCE005092-PDC
KIT17TUBTRA01-PDC
KIT25MAINMAVA-PDC
2years
SENS008094-PDC
Instruction and user manual PICO DUO Rx controller
Action
Check pool water parameters TAC >
100 mg/L
Check condition of sensor cables
Check pool water parameters TAC >
100 mg/L
CODE
Peristaltic tube 6*9mm
Tube 4x6 PVC Cristal
Roller holder kit + transparent cover +
6x9 tube
Injection valve
16
650
DESIGNATION