Herunterladen Inhalt Inhalt Diese Seite drucken

Operation - Omnitronic DR-1000 Bedienungsanleitung

Diversity-empfänger
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

When mounting the device into the rack, please make sure that there is enough space around the device so
that the heated air can be passed on. Steady overheating will damage your device.
You can fix the device with four screws M6 in the rack. If several devices are to be installed, make sure that
you leave 1 unit space between the devices.
With the DR-1000, up to 16 mics with 16 receivers can be operated simultaneously. In this way, you can
realize large wireless systems. Please respect the distances between the individual channels as illustrated in
the table below:
Channel Frequency Channel Frequency Channel Frequency Channel Frequency
1
790.875
2
792.625
3
794.250
4
795.625
Please do also refer to the illustration at the back of this user manual.

6. OPERATION

With the ON/OFF-switch, you can switch the device on and off.
Select the desired frequency either manually via the mini switches or activate the automatic scan-function.
Select the desired frequency via the mini switches: press and hold the Set-button for 3 seconds, the
display shows "Freque". Press the Up or Down-button in order to select the desired frequency. Press the
Set-button in order to store the settings.
Start automatic scan-function: press and hold the Set-button for 3 seconds, the display shows "Freque".
Press the Set-button again and the display shows "Scan". Press the Up or Down-button in order to start the
automatic scan-function. Press the Set-button in order to store the settings.
If microphone signals are being received, the RF-LEDs are illuminated.
For optimum receiving please follow these instructions:
• Maintain a line-of-sight between the transmitter and receiver antennas, if possible. Avoid placing
transmitter and receiver where metal or other dense materials may be present.
• Avoid placing the receiver near computers or other RF generating equipment.
Adjust the signal output level via the Volume-control.
5
797.125
6
798.875
7
801.125
8
802.250
9
803.625
10
805.250
11
805.750
12
808.625
14/33
13
809.125
14
810.000
15
813.250
16
813.750
00025923.DOC, Version 1.3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis