Renkforce 1408618 Bedienungsanleitung Seite 66

Alarm function:
The alarm function sets a time after which the selected lamp
is switched on or off.
It depends on how you program the lamp. If you set the
brightness all the way to the left, for example and switch on
the lamp before the end of the time, it will be switched off
again at the end of the time.
You can also program several alarms.
• To set an alarm, tap the "+" at the lower middle.
• Use "+" or "-" to set the respective hours
and minutes.
• To save, tap the "Save" in the setting window of the timer.
66
• Now tap "Device status" and set the
brightness and colour temperature of
the lamp. You can additionally auto-
mate playback here. This works in the
same way as manual operation. Tap
"Save" in the small window after mak-
ing the settings.