Renkforce 1408618 Bedienungsanleitung Seite 63

• Tap the small arrow to open the desired
type.
• If the chosen lamp is off, push its slider to the position
"ON" (1).
• Use the upper slider (2) to set the brightness.
• Use the slider below (3) to set the colour temperature.
• Alternatively, you can also have the LED lamp controlled
automatically.
• Tap the 3 rings (4) to select the fade character (next fig-
ure on the left).
"Jump" = switch quickly; "Fader" = fade slowly; "Candle"
= candle-light flicker
• If you tap the (5), you can select the speed (next figure
on the right).
• The arrow (6) starts automatic control. To stop it, just tap
the pause button.
• You can also use a timer (7) and an alarm function (8).
Both are explained below. Just tap the respective sym-
bol.
• Select the desired lamp and tap
it.
63