Renkforce 1408618 Bedienungsanleitung Seite 56

• To select a lamp or group for the scene, simply push its
slider to position "ON" (1).
• Use the upper slider (2) to set the brightness.
• Use the slider below (3) to set the colour temperature.
• Alternatively, you can also have the LED lamp controlled
automatically in the scene.
• Tap the 3 rings (4) to select the fade character (lower
left figure):
"Jump" = switch quickly; "Fader" = fade slowly; "Candle"
= candle-light flicker
• If you tap the middle area (5), you can select the speed
(lower right figure).
• The arrow (6) starts automatic control.
• Set all lamps or groups individually and tap "Save" to save.
• Confirm the message that appears with "OK".
56