Registering An Led Lamp At The Gateway (Qr-Code) - Renkforce 1408618 Bedienungsanleitung

c) Registering an LED lamp at the gateway (QR-code)
Various suitable LED lamps can be registered and operated at the gateway.
We will explain the function and settings to you based on an LED driver with ZigBee
module to which an LED panel is connected which is controlled via 2 channels. It can
emit only warm-white, only cold-white or mixed light.
In any case, ensure that the LED panel is correctly connected to the LED driver.
It is easiest to register the LED driver at the gateway by scanning the QR code enclosed with
the LED driver.
The next chapter describes how to add the LED driver manually. The path until selection of the
QR-code/manual is identical.
Proceed as follows.
• In the main menu, tap in the upper right
on the arrow pointing down.
• Then tap
"Add device"
-
®
45