Manual Time Setting; Setting The Alarms - Vlahova Rb3568 Bedienungsanleitung

 Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme
circumstances, place the system close to the window.
 During the RC receive mode, only the【Snooze/ Light】 and 【
are not functional, If you want to carry out other functions of operation, please press 【
the RC receiving mode.

Manual time setting

 Press and hold the button "
buttons to set the RCC function is ON or OFF.
" button to confirm the item has been set and go to the next one, the sequence of setting items
 Press the "
is as follows:
RCC ON/OFF  DST ON/OFF  Time zone  12/24Hr  HOUR  MINUTE  Current weather 
Pressure unit  Pressure value
 When adjusting the value, press and hold the " " or " " button to adjust quickly.
 Press " "button to confirm the last item to end the setting procedures, then it will return to the normal mode.
 When choosing the 12Hr format, if "PM" is displayed before the hours , it means that the hour is post meridiem,
if there is no "PM" displayed , it means that the hour is ante meridiem.
F.Y.I.:
 If there is no valid operation within 20 seconds, it will automatically return to normal time mode from the set
mode.

Setting the alarms

 Press button , you can set Alarm1 and Alarm2 ON or OFF, symbol
ON, symbol appear means that ALARM2 is ON, symbol
ALARM is OFF.
 Press once button
displayed, LCD display Alarm2 time (5 seconds), press button
to current time display.
 When Alarm1 time is displayed, press and hold button
to flash, press the
 Press button to confirm the item has been set and go to the next one, the sequence of setting items is
as follows:
Hour of Alarm1  Minute of Alarm1  Snooze time of Alarm1
 The snooze time can be set to 1-30 minutes or OFF, if "OFF" is selected, it means that the snooze function
is turned off.
 The Alarm2 time can be set according to the same method above.
F.Y.I.:
 If there is no valid operation within 20 seconds, it will automatically return to normal time mode from the
alarm time set mode.
 When adjusting the value, press and hold the
" for 2 seconds, the "
, LCD display Alarm1 time (5 seconds), press button
or buttons to set the required Hour.
RB3568
】 buttons have a function, other buttons
ON/OFF " starts to flash, and press the " " or " "
or
again when Alarm2 time is displayed, return
for 2 seconds until Hour of the Alarm1 time starts
or button to adjust continuously and quickly
】 button to exit
appear means that ALARM1 is
disappear means that Corresponding
again when Alarm1 time is