Switching Off The Alarm Signal; Snooze Function - Vlahova Rb3568 Bedienungsanleitung

 The Alarm will sound for 2 minutes if you do not deactivate it by pressing any button.

Switching off the alarm signal

 When it's ringing, press any button except the
 When it's ringing, touch and hold the

Snooze function

 When it's ringing, touch the
snooze time is over, it will ring again.
RF Transmission Procedure
 The main unit automatically starts receiving transmission from remote sensor for the temperature &
humidity after batteries inserted.
 The remote sensor will automatically transmit temperature and humidity data to the main unit after batteries
inserted.
 If the main unit failed to receive transmission from remote sensor ("- -.-" and "- -" appears at the remote
sensor temperature and humidity display position ), press and hold the 【CH】 button for 2 seconds, RF
icon will be flashing，the main unit will rescan the launch signal of the channel.
 If multiple remote sensors are paired, press the 【CH】 button to view the temperature values of other
channels, when symbol
°C /°F unit transfer
 Press the button to switch ℃ or ℉ units.
Query Maximum/minimum numerical value
 When the temperature and humidity are shown in the LCD, The main unit began to record temperature and
humidity maximum and minimum numerical value.
 Press once "MEM" button, the LCD will display maximum value of temperature and humidity, The LCD will
display the minimum value of temperature and humidity if press once "MEM" button again when the maximum
value is displayed.
 at the same time, there are "MAX" or "MIN" displayed on the LCD.
 The temperature and humidity maximum/minimum value will RE records after press and hold "MEM" button
2 seconds.
 The memory value of the day will be automatically cleared at 0:00 every night.
F.Y.I.:
 If the temperature reading is below ranges, the LL.L will be displayed. If the temperature reading is above
ranges, the HH.H will be displayed.
Weather forecasting function
 Please take the weather forecast from your local weather forecasting service into account as well as the
forecast from your weather station. If there are discrepancies between the information from your device and
RB3568
button for 2 seconds to stop the Alarm sound.
button once the alarm sounds to get to snooze mode, when the set
is displayed, the 3 channels are displayed cyclically every 5 seconds.
button to stop the Alarm sound.