Radio Controlled Clock; Manual Time Setting - Vlahova Rb9412 Benutzerhandbuch

7.1 Radio Controlled Clock:

After batteries inserted, the clock automatically starts to scan the DCF time signal. Radio Control Icon "

" flashes on the LCD.
flashes,
Indicating now is receiving DCF
signal
The clock automatically scans the time signal at 3.00 a.m. every day to maintain accurate timing. If

reception fail, scanning stops ("
The clock can be set to scan the time signal manually by holding "

reception takes about several minutes.
Stop scanning by holding "

" " shown on the LCD if it is in Daylight Saving Time Mode


7.2 Manual Time Setting:

In time display mode, hold "MODE" button for 3 seconds to enter Clock/Calendar setting Mode.

Press "+" or "-" button to adjust the setting and press "MODE" button to confirm each setting. By keeping

the "+" or "-" button pressed, could speed up the setting.
The setting sequence is shown as follow: 12/24Hour, RCC on/off, Time Zone, Weekday Language, Hour,

Minute, Second, Year, Month, Date, Temperature Unit, Alarm sound duration.
There are 10 languages for day of week: German, English, French, Italian, Dutch, Spanish, Danish, Czech,

Polish, Swedish
Note:
(9) All Setting mode will automatically exit in 15 seconds without any adjustment
(10) For Time Zone: If you receive no RC-DCF frequency signal, the time zone should be set to 0. Time Zone is
used in countries which can received the DCF frequency signal but the time zone is different from German
Time ( i.e. GMT+1).
(11) Alarm sound duration: there are two options available, "1 minute" and "2 minutes".
(12) Second only can be adjusted to 0.
7.3 Daily Alarm Function:
Press "MODE" button and select to view alarm time, "ALARM TIME" flashes on the display

turns on,
Indicating signal received
successfully
" on LCD disappear)
" button (B6) for 3 seconds.
disappear,
Indicating signal reception
failed
" button (B6) for 3 seconds. Each