Foscam R4M White Benutzerhandbuch Seite 8

7. Please scan the QR code on the phone screen with the camera, then you will hear
a voice prompt say, "WiFi connecting". Select the checkbox and tap "Next".
Place the QR code directly in front of
Tips: Please place the QR code on the phone screen about 10 to 15cm (3.94 to 5.9in)
away, and if you encounter difficulties, you can try move the screen slowly around 10 –
15 cm (3.94-5.9in).
8. Wait a few seconds until the camera notifies you that the "Wireless connection
succeeded", which means your camera has connected to your WiFi successfully.
After, you can set the camera name and tap "Save" in "Set name" interface.
the camera
Camera added successfully and the
name has been set
Tick the checkbox and tap
8
„Next"