Network Setup - Octagon SF 2028 HD OPTIMA 3D Bedienungsanleitung

IV. System Configuration
This Product supports four search modes as below.
- Auto Mode Auto Mode
All channels will be searched if the selected satellite
is properly assigned in the Antenna Setup menu.
 Search Type :
* Multi Satellite : Search multiple satellites as you
select in pop-up window.
* One Satellite : Search only the current
* Multi Transponder : Search multiple TS in p
transponder pop-up window.
* One Transponder : Search current transponder.
 Satellite : Select one of Satellites. (Select satellite
in the auto search menu and press RED key to Multi
Satellite Register).
 Transponder : Select one of transponders in TP
list.
 NIT Search : Activate network search mode.
 Channel Mode : Select one of search types
between "All", "FTA", "TV Only"
 Copy searched CHs to other Tuner : Select "YES"
Searched channel is copyed the other Tuner.
- Manual Mode
Additionally Transmission method can be edited. y
You can adjust or edit transponder in "Edit TP" and
"Fine Tune" function.
- Blind Mode
When a new satellite is selected or you want to
search all Transponder from a satellite which is known
or unknown transponder.
- Advance Mode
Additionally you can set search value like
Audio/Video/PCR PID and Video/Audio data format.
C. Network Setup
[ I : Press Menu key > INSTALLATION > Network
Setup ]
- Device : You can select network device.
- IP Mode : you can select IP setting mode as static
and DHCP.
- RED (save) : save current configuration.
- GREEN (Ping) : Verify the status of network
connection to the server.
Also wifi configuration setup is supported on this
menu.
e
p
" ,
31
31