Bosch GAS 35 M AFC Professional Originalbetriebsanleitung Seite 17

ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols could have a meaning for the use of
your vacuum cleaner. Please take note of the symbols and
their meaning. The correct interpretation of the symbols will
help you to use the vacuum cleaner in a better and safer man-
ner.
Symbols and their meaning
CAUTION
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Vacuum cleaners of dust category M ac-
cording to IEC/EN 60335-2-69 for dry vac-
uuming of materials with an exposition limit
value≥ 0.1 mg/m
one's health
WARNING
that are hazardous to one's health. Have
the emptying and maintenance, incl. the
disposal of dust-collection containers,
carried out only by specialists. Appropri-
ate protective equipment is required. Do
not operate the vacuum cleaner without
the complete filter system. Otherwise
there is danger to your own health.
Automatic Start/Stop feature
Extraction of dusts resulting from running
power tools
The vacuum cleaner automatically switches
on and off with a time delay
Switching Off
Vacuuming
Vacuuming of deposited dusts
Bosch Power Tools
Read all safety warn-
ings and all instruc-
3
that are hazardous to
The vacuum cleaner
contains materials
Symbols and their meaning
15 Airflow monitoring for a 15 mm hose diam-
eter
22 Airflow monitoring for a 22 mm hose diam-
eter
35 Airflow monitoring for a 35 mm hose diam-
eter
Min/Max Infinitely variable control of the vacuuming
power:
– Maximum vacuum capacity for applica-
tions with intense dust development
– Reduced vacuum capacity for applica-
tions with low dust development and for
control of the vacuuming power between
connected power tool and workpiece
surface (e. g. when sanding)
Specification of the allowable load of the
connected power tool (country-specific)
AFC Automatic filter cleaning
(AFC = Automatic Filter Cleaning)
Attach only one L-Boxx (max.).
The weight of the L-Boxx with contents
must not exceed 15 kg.
English | 17
1 619 929 L61 | (14.2.13)