Care And Maintenance - Tfa View Meteo Bedienungsanleitung

8. Care and maintenance

Clean the devices with a soft damp cloth. Do not use solvents or scouring agents.
y
Remove the batteries and unplug the power adapter of the base station if the device will not be used for a long period of time.
y
Store the devices in a dry place.
y
9. Troubleshooting
Problem
No display on the
base station
No reception of the
outdoor transmitter
Display "- -"
Incorrect indication
Display Hi/Lo at
measured values
For more information on troubleshooting, see the FAQs on our website:
www.tfa-dostmann.de/en/service/frequently-asked-questions/faq-view-stations/
If your device fails to work despite these measures, contact the retailer where you purchased the product.
10. Specifications
Base station
Measuring range - temperature:
Measuring range - humidity:
Precision:
Power supply:
Input power adaptor:
Output power adaptor:
Average active efficiency:
No-load power consumption:
Transmission frequency:
Maximum radio-frequency power:
Transmission range:
Dimensions:
Weight:
Wi-Fi requirements
Wi-Fi transmission frequency:
Network name / network password:
Network speed:
Important! If you have a multi-band router (e.g. 2.4 & 5 GHz), make sure your mobile device is connected to the 2.4 GHz network if you
want to connect base station and app.
Requirements for your mobile device (smartphone or tablet)
Apple devices require at least iOS 9 or higher and Internet access via Wi-Fi or mobile data.
Android devices require at least OS 5.0 or higher and Internet access via Wi-Fi or mobile data.
Solution
Operation with power adapter:
Connect the base station to the power adapter
Activate backlight
Check the power adapter
Battery operation:
Ensure the batteries' polarities are correct
Press any button to activate the backlight briefly
Change the batteries
No outdoor transmitter is installed
Check the outdoor transmitter's batteries (only use batteries/rechargeable batteries with 1.5V voltage!)
Restart the outdoor transmitter and the base station according to the manual
Manual search for the transmitter (according to the manual)
Choose another place for the transmitter and/or the base station
Reduce the distance between the transmitter and the base station
Check if there is any source of interference.
Factory reset: see point 6.9.1
Battery operation
Change the batteries
Outside measuring range
0°C ... +50°C (+32°F ... +122°F)
10% ... 99% rH
temperature (± 1°), humidity (± 5%)
Power adaptor (inclusive), batteries (3 x AA 1.5V, not included)
We recommend Alkaline batteries.
100-240 V~, 50/60 Hz, 0.5A Max
5 V⎓, 0.6A, 3W
≥ 69.64%
≤ 0,1 W
868 MHz
< 25mW
100m (open field)
197 x 32 (85) x 163 mm
343 g (device only)
2.4 GHz (802.11 b/g/n)
must not exceed 45 characters
Minimum 1 Mbit/s
26