TFA View Meteo Bedienungsanleitung Seite 23

There are 12 different weather symbols:
y
Sunny Slightly cloudy
Sleet Fog
In the upper left corner, the probability of rain in percent is displayed next to the weather symbol.
y
The forecast refers to the location (region/zip code) that was saved during the installation of the device via the app.
y
6.4 Max-min function, heat index and dew point
6.4.1 Max-min function for temperature & humidity + heat index & dew point of the outdoor transmitter
Press the TEMP button (Fig.2-B) in normal mode.
y
You can now see the HI RECORD for the outdoor temperature (since the start-up or the last reset) with time and date of recording.
y
Press the TEMP button and go to the next information.
y
y The sequence of the available information in this mode is shown as follows:
HI RECORD Outdoor temperature
y
y LO RECORD Outdoor temperature
HI RECORD Outdoor humidity
y
y LO RECORD Outdoor humidity
HI RECORD Indoor temperature
y
LO RECORD Indoor temperature
y
HI RECORD Indoor humidity
y
LO RECORD Indoor humidity
y
Current heat index temperature of the outdoor transmitter
y
Current dew point temperature of the outdoor transmitter
y
Hold the "-" button (Fig.2-E) for 5 seconds while the respective value is displayed to clear the recorded readings. Every max-min value can
y
be reset individually.
y The device will automatically quit the max-min mode if no button is pressed for 10 seconds.
The heat index temperature is calculated above +26.6°C using the outdoor temperature and outdoor humidity. Below, this value
y
is identical to the outdoor temperature.
Cloudy Rainy
Isolated rain Low snowfall
23
Thunderstorm Heavy snowfall
Frost Stormy