Lenze E82ZBB Montageanleitung Seite 44

4 Operation
Description of the display elements
Display Meaning
Bar graph display

Value set in C0004 in %
(Lenze setting: Device utilisation
C0056)
Parameter set display

In the mode :
Display of the parameter set activated
via digital signal
Otherwise:
Display of the parameter set active for
changing
Code number display

Subcode number display

Display of parameter value or fault message

Pos. Key Function
Function keys

Enable controller

Inhibit controller (CINH) or quick stop

(QSP)
Change of function bar 1 ↔ function

bar 2
To the right/left in the active function

bar
Increase/decrease value

Quick change: Keep the key pressed
Store parameters if  is blinking

Confirmation by STOre in the display
44
Explanation
Display area: - 180 % ... + 180 %
(1 mark = 20 %)
Select the individual parameter sets in the
 mode in the function bar 2
Explanation
For operation with a function module the
X3/28 terminal must be set to HIGH level.
Configuration in C0469; inactive if the
standard device is running in manual mode
(C0410/17)
The active function is framed.
Only blinking values can be changed.

EDK82ZBC DE/EN/FR 2.0