Philips HR2355/12 Benutzerhandbuch Seite 18

Selecting the pasta making program
• Do not select the extrusion-only program before the dough mixing is complete.
Otherwise, this will damage the Pasta maker and its lifetime.
• Do not disconnect the power cord before processing is complete. If you have to
stop processing, press the on/off button
disconnect the power cord from outlet before performing other operations.
• To better protect the lifetime of the appliance, it is recommended the continuous
working time be less than 45 minutes. You can restart using the appliance after a
15 minute rest.
• If you intend to use the appliance continuously, clean the shaping disc with the
supplied cleaning tool each time after each pasta making session. For cleaning
ease, do not soak the shaping disc directly in water.
1
Connect the power plug to any 220-240V AC
outlet. The Pasta maker will sound once, and all
indicators will flash once. Press the power on/off
button to switch on the Pasta maker.
2
Based on the amount of flour, press the servings
button to select
to make ~ 600g of fresh pasta.
18 English
Important
to turn off the Pasta maker and then
to make ~ 300g or