Ayce RLP16 Gebrauchsanweisung Seite 103

2. Insert the battery into the charger as shown in Fig. 4.
3. Connect the charger to the power supply (Fig. 5).
4. After a sufficient charging time (about 1.5hours, LED on charger lights up
green), disconnect the charger from the power supply.
NOTE: It is normal for the battery and charger to become warm (but not hot)
during charging process. If the battery does not charge properly, check to
make sure the electrical outlet is "live".
Notes on charger:
LED on charger lights up red: Battery is charging.
LED on charger lights up green: Charging completed.
Fig. 4
Fig. 5