Noise/Vibration Information - Ayce Rlp16 Gebrauchsanweisung

Noise/Vibration Information

Measured sound values determined according to EN 62841-1.
The noise figures quoted are emission levels and are not necessarily safe
working levels. Whilst there is a correlation between the emission and
exposure levels, this cannot be used reliably to determine whether or not
further precautions are required. Factors that influence the actual level of
exposure of work-force include the characteristics of the work room, the
other sources of noise, etc. i.e. the number of machines and other adjacent
processes, and the length of time for which an operator is exposed to the
noise. Also the permissible exposure level can vary from country. This
information, however, will enable the user of the machine to make a better
evaluation of the hazard and risk.
Wear hearing protection!
Vibration total values (triax vector sum) determined according to EN 62841-1
The vibration emission level given in this information sheet has been measured
in accordance with a standardised test given in EN 62841-1 and may be used
to compare one tool with another.It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the main applications of the
tool. However, if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into
account the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect the operator from the effects of
vibration such as: maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
Wear high-quality safety gloves!
GB
97 | 98