VEVOR SCA-30NS Benutzerhandbuch Seite 8

CONNECTION OF ELECTRICITY SUPPLY
CABLE
1.Only a qualified electrician can finish the connection of the heater's
cables. You must obey electrical codes to complete the installation.
Rubber-insulated lines are suggested as the connection cables from the
main supply to the sauna heater.
2.The junction box inside sauna heater must be of a hermetic,splashing
proof type, also including a 7mm diameter drainage hole to prevent
moisture and condensation.The junction box should be less than 500mm
over the floor.
VENTILATION
To have a smoothing sauna bath, there should be a proper mixing of hot
and cold air inside the sauna room. Another reason for ventilation is to
draw air around the sauna heater and move the heat to farthest part of
- 7 -