Specifications And Technical Data; Tool Specifications; Fastener Specifications - Celo Force One+20 Betriebsanleitung

OPERATING INSTRUCTIONS MANUAL

1. SPECIFICATIONS AND TECHNICAL DATA

1. NAME OF PARTS (SEE Fig.1)
1 Cylinder Cap
2 Fuel Cap
3 Housing
4 LED
5 Trigger
6 Battery
7 Hook
8 Nail Stopper
9 Contact Nose
0 Follower
a Follower Holder
NOTE: The triangle symbol marked as " " following its tool serial number indicated that safety yoke is equipped with this tool.
2.

TOOL SPECIFICATIONS

PRODUCT NO.
HEIGHT
WIDTH
LENGTH
WEIGHT
LOADING CAPACITY
BATTERY
BATTERY CAPACITY
CHARGER
POWER SOURCE
POWER CONSUMPTION (Rated Output)
CHARGING TIME
ACCESSORIES
TEMPERTURE RANGE FOR USE
3.

FASTENER SPECIFICATIONS

PRODUCT NO.
PIN LENGTH
SHANK DIAMETER
SHANK TYPE
HEAD DIAMETER
b Magazine
c Magazine Foot
d Pack Cap
e Terminal Block
f Battery
g Battery Setting Hollow
h Jack
i Power Cord
j Charger
k Power Plug
l AC Adapter
FORCE ONE+20
380 mm (15˝)
123 mm (4-7/8˝)
328 mm (13˝)
3.6 kg (7.9 lbs.)
(Including Battery)
22 pins
Safety glasses, Carrying case, Battery, Charger, Jam clear tool
FORCE ONE+20
5
Battery (Part # GN70381)
6 V DC, 1.5 Ah
Charger (Part # GN70380)
100-240 V AC, 50 or 60 Hz
8 VA (10 V 800 mA)
150 minutes at maximum
-5 °C / 23 °F to 40 °C / 104 °F
13 to 38 mm (1/2˝ to 1-1/2˝)
2.6 mm or 3.0 mm (.102˝ or .120˝)
Smooth, Step
6.4 mm (.252˝)
FORCE ONE+40
380 mm (15˝)
123 mm (4-7/8˝)
435 mm (17˝)
3.8 kg (8.37 lbs.)
(Including Battery)
42 pins
FORCE ONE+40