At A Minimum, Employers, Tool Owners And Tool Operators Must - Celo Force One+20 Betriebsanleitung

WARNING
Before using the tool, read and understand fol-
lowing instructions. Failure to so could result in
DEATH or SERIOUS INJURY.
Explanations of symbols marked on the tool.
Before using the tool, read and understand tool
labels, Safety instructions manual and Operating
instructions manual. Failure to follow warnings
could result in serious injury.
Keep these instructions with the tool for future ref-
erence.
Additional copies of this manual, operating in-
structions manual and tool labels are available
online. For further information, contact us at our
web page.
Operators and others in work area shall wear
impact-resistant eye protection with side shields.
Danger to the eyes always exists due to the pos-
sibility of dust being blown up by the exhausted
air or of a fastener flying up due to the improper
handling of the tool.
Eye protection equipment must conform to the re-
quirements of the American National Standards
Institute, ANSI Z87.1 (Council Directive 89/686/
EEC of 21 DEC. 1989).
The employer is responsible to enforce the use of
eye protection equipment by the tool operator and
all other personnel in the work area.
To warn of capability of operating in contact
actuation mode.
This tool has either selective actuation for
contact actuation or continuous contact actu-
ations by actuation mode selectors or is a
contact actuation or continuous contact actu-
ation tool and has been marked with the sym-
bol above. Its intended uses are for
production applications such as pallets, furni-
ture, manufactured housing, upholstery and
sheathing.
As the working condition may include exposure to
high noise levels which can lead to hearing dam-
age, the employer and user should ensure that
any necessary hearing protection is provided and
used by the operator and others in the work area.
EMPLOYERS, TOOL OWNERS AND TOOL OPERATORS ARE
RESPONSIBLE FOR THE SAFE USE OF THIS TOOL
AND COMPLIANCE WITH ALL WARNINGS AND INSTRUC-
TIONS.
WHEN DISPOSING THE MACHINE OR ITS PARTS, FOLLOW
THE RELEVANT NATIONAL RULES.
Do not dispose of waste electrical and electronic equipment and
used batteries together with household waste material.
Only for EU countries
For proper treatment, recovery and recycling of old products,
please take them to applicable collection points, in accordance
with your national legislation and the Directives 2012/19/EU and
2006/66/EC.
ENGLISH
Only for United Kingdom
For proper treatment, recovery and recycling of old products,
please take them to applicable collection points, in accordance
with the Regulations 2013(SI 2013/3113) and 2009(SI 2009/
890).
For business users in the European Union and United Kingdom.
If you wish to discard waste electrical and electronic equipment
and used batteries, please contact your dealer or supplier for
further information.
For more information about collection and recycling of old
products, please contact your local municipality, your waste
disposal service or the point of sale where you purchased the
items. Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.
By disposing of these products correctly, you will help to save
valuable resources and prevent any potential negative effects on
human health and the environment which could otherwise arise
from inappropriate waste handling.
The Gas Nailers are manufactured to meet RoHS directives.
At a Minimum, Employers, Tool Owners and
Tool Operators Must:
1. ensure that the manufacturer's tool operating/safety instruc-
tions, warnings and labels are available to all tool operators
and users. Do not use tool with missing or damaged safety
warning label(s.);
2. select an appropriate tool actuation (trigger) system from the
options available, taking into consideration the work applica-
tions for which the tool is being used. Contact Celo authorized
distributors for information on actuation systems options;
3. train tool operators and users in the safe use of the tool as de-
scribed in the tool operating/safety instructions, warnings and
labels;
4. allow only persons who have read and understood the tool op-
erating/safety instructions, warning and labels to operate the
tool.
5. allow tool use only when tool operator and all other personnel
in work area are wearing appropriate eye protection equip-
ment, and when required, other appropriate personal protec-
tive equipment, such as, head, hearing and foot protection
equipment. Provide information about the safe duration of use
and appropriate working positions.
STATEMENT OF USE
Tools with this symbol shall only be used for production applica-
tions such as pallets, furniture, manufactured housing, upholstery
and sheathing. Any other use is forbidden.
1
These symbols on the products and accompanying
instruction manual mean that waste electrical and
electronic equipment and used batteries should not
be mixed with general household waste.
For environmental protection and recycling of
materials, be sure that it is disposed of at an officially
assigned location, if there is one in your country.
- If using the tool in selective actuation mode,
always ensure it is in the correct actuation
setting.
- Do not use the tool in contact actuation for
applications such as closing boxes or crates
and fitting transportation safety systems on
trailers and lorries.
- Be careful when changing from one driving
location to another.
- Warning that the tool shall only be used in
safe working places.