Herunterladen Diese Seite drucken

Operating Method - TIGEX EXPRESS Handbuch

Babyflaschenwärmer express zur verwendung im auto/zu hause
Vorschau ausblenden Andere Handbücher für EXPRESS:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 11
GB
Operating instructions for the express bottle
warmer for car and home use
Please read these instructions carefully before use. Keep them in a safe
place in case you need them for future reference.
INSTRUCTIONS THAT MUST BE OBEYED
- Before using the appliance for the first time, check that it is compatible with
the voltage of your electricity system.
- Always put the bottle warmer on a flat, dry surface out of the reach of chil-
dren.
- Remember that there is no substitute for proper adult supervision.
- Bottles must be placed in the tank, with the ring slightly loosened.
- Baby food jars should be heated with their lids removed.
- Never turn the appliance on without having filled up the tank with required
amount of water (use water that contains no additives).
- Let the appliance cool for 15 minutes between uses. Do not touch the insi-
de of the tank during, or just after, use.
- Do not forget to unplug the appliance after use.
- Never immerse the appliance in water.
- In the event of malfunction, do not disassemble the appliance, even to
change a damaged lead. It must be repaired by our staff with special tools
to ensure safety.
- This device can be used by children of at least 8 years of age and by people
with physical, sensorial or mental disabilities or without experience or
knowledge of the device, if they are correctly supervised or if instructions
relating to the device's safe use are given to them and the potential risks
involved are understood. Children should not be allowed to play with the
device. Cleaning and maintenance of the device should not be carried by
unsupervised children.
- It is essential to supervise children to ensure that they do not play with the
appliance.
If the lead suffers any damage, it must be repaired by the manufacturer, the
after-sales services or a qualified person in order to ensure it is done so safe-
ly.
Do not disassemble the appliance yourself.
Do not use the appliance outdoors. This appliance is designed to be used at
home or in an equivalent place, such as staff kitchens, offices, shops or other
working environments, farms, hotels or accommodation.
For use in cars:
- Never use the bottle warmer when the car is moving. Keep your engine run-
ning while the bottle warmer is working to avoid discharging your battery.
- The car adapter lead (j) is specially designed for this Tigex bottle warmer:
never use it with other appliances. Only use the leads provided.
- Regularly check the state of the cigar-lighter and clean it when necessary.
- If you have just used your cigar-lighter, let it cool for about 5 minutes in the
open position before connecting your bottle warmer.

OPERATING METHOD

1
1/ Fill the bottle warmer's measuring cup (d) in accor-
dance with the instructions in the diagram on pages 3, 4
and 5 and then pour the contents into the tank (g).
2/ Never warm up a bottle directly in the bottom of the
2
aluminium tank. Always use the tray (a) or the wide-nec-
ked bottle holder (c): see diagram on page 3-4-5.
To heat baby food jars (without the lid) use the tray (a).
To warm bottles with standard necks (slightly loosened
ring), use the tray (a).
To warm wide-necked bottles (slightly loosened ring),
place the wide-necked bottle holder (c) feet-first into the
bottom of the tank (g) and then place the bottle into the
holder (c).
3/ If the bottle's diameter allows it, add the heating
3
accelerator ring (b) to the tank (g).
Tigex tip
In order to avoid spreading bacteria, prepare and heat
bottles and baby food jars just before meal time. Never
keep an unfinished bottle.
It is recommended to refrain from warming food for long
periods.
11
4/ * HOME USE
4
Plug in the appliance at the mains
using the mains cable (h). Turn the
switch at the back of the appliance (k)
to the Home position.
* CAR USE
Connect the car adapter lead (j) into
the back of the appliance and flick the
switch at the back (k) into the Car posi-
tion. Then connect the lead (j) into
your car's cigar-lighter.
5/ Press the ON switch (e) to start the warming cycle. The
5
light will be activated (f ).
The ON switch (e) cannot be used to turn the appliance
off.
The appliance will turn off automatically once the war-
ming cycle is complete.
CAUTION: the steam that is released during heating is
very hot. Do not put your hand close to the appliance
while it is in use
6/ Without delaying, carefully remove
6
the bottle or baby food jar and then
turn the switch (k) at the back of the
appliance to the OFF position.
You may now unplug the appliance.
For a bottle: screw the ring back on
properly and then shake well to ensure even distribution
of the contents. Pour a few drops of the liquid on to the
back of your hand to test the temperature.
For a baby food jar: stir the contents and test the tempe-
rature.
Make sure that the appliance has cooled down before
cleaning it or putting it away.
To facilitate stowing, hooks (i) have been fitted at the
back of the appliance to wrap the cable (h).
Cleaning the bottle warmer:
Always unplug the appliance and wait for it to completely cool down before cleaning.
Use a damp cloth to clean the inside and outside of the tank (g). Never immerse the tank
(g) in water.
Do not use abrasive products.
The baby food jar tray (a), heating accelerator ring (b), wide-necked bottle holder (c) and
measuring cup (d) can be cleaned with a sponge using soap and water or put into the top
tray of a dishwasher.
Descaling the tank:
Depending on the quality of the water used, a limescale deposit may build up on the bot-
tom of the tank (g) over time.
Regularly descale your appliance by pouring a mixture consisting of 100ml of water and
100ml of white vinegar into the tank (g). Leave for around 30 minutes before emptying the
tank (g) and wiping it with a damp cloth.
Do not use detergents.
To take advantage of the 2-year guarantee on this product and obtain a replacement, plea-
se read the information on the attached guarantee coupon.
Technical specifications for home use:
Power
AC 230V; 50 Hz
Electricity use
650 W
Room operating temperature
From 7°C to 37°C
Technical specifications for car use:
Power
DC 12V
Electricity use
100 W
Room operating temperature
From 7°C to 37°C
Comply with prevailing European standards.
12
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF

Werbung

loading