Herunterladen Inhalt Inhalt Diese Seite drucken

Hacker Para RC ARTF Montage- Und Betriebsanleitung Seite 18

Rucksackmotor mit rc-astral artf
Inhaltsverzeichnis

Werbung

Die Startphase: Den Gleitschirm mit einem Impuls gegen den Wind aufziehen. Halten Sie den
Rucksackmotor mittig und laufen Sie vorwärts. Kurz bevor der Schirm am Zenit angekommen ist den
Motor anschalten und den Rucksackmotor freigeben. Nicht werfen, sondern leicht nach vorne
schieben.
Wichtig: Halten Sie den Rucksack so, dass die Bremsleinen nicht verkürzt sind.
Tip: Beschleunigt startet der Schirm besser.
How to start: Pull the paraglider with an impulse against the wind. Hold the pilot centered and run
forward. Just before the paraglider has reached its zenith turn on the throttle and release the pilot.
Do not throw it, just lightly push it forward.
Important: Hold the pilot in a way the brake lines are not shortened. Accelerated staring is easier.
richtig / right
falsch / wrong
Wir wünschen Ihnen viel Spaß und schöne Flüge. We wish you lots of fun and enjoyable flights.
Ihr Hacker - Team / Your Hacker – Team
Anleitung / Manual Hacker Para RC „Rucksackmotor mit RC-Astral ARTF"
© 2014 Hacker Motor GmbH
Seite / page 18

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis