Hama DR1500BT Bedienungsanleitung Seite 6

5.2 Activate alarm function
• Press ALARM to open the Alarm menu.
• Use SCROLL/OK ► II to select Alarm 1 or 2.
• Press SCROLL/OK ► II to confirm your choice.
• Then use SCROLL/OK ► II to choose the Alarm Source
menu item.
• Press SCROLL/OK ► II to confirm your choice.
• Use SCROLL/OK ► II to choose the alarm type desired.
Turn SCROLL/OK ► II to cycle through the following
sequence:
• Press SCROLL/OK ► II to confirm the selection once the
display shows the desired alarm type. The alarm is now
activated and on the display you will see a bell icon along
with the number 1 or 2 for the selected alarm.
• The alarm sounds at the set time.
• Press G if you wish to switch off the alarm.
Note
• Take care that the volume has been set at a sufficient
level if you wish to be woken up by a DAB or FM
station.
• The tuned station will play for approx. 1 hour, as will a
ring tone if set as an alternative.
5.3 Automatic repeat of alarm and switching off
alarm function
The alarm will automatically repeat every day at the set
time for as long as the alarm function is switched on.
Press ALARM, select Alarm 1 or 2 and then select Alarm
# off under the Alarm Source menu item in order to switch
off the relevant alarm function (1 or 2).
5.4 Snooze function
Note
• The snooze function only works on the currently active
alarm. If the second one sounds when the first alarm
is active, this second alarm has to be interrupted
separately with the snooze function.
• Press SNOOZE if you wish to interrupt the alarm but not
fully switch it off. The alarm sounds again after around 5
minutes' silence. An active snooze function is indicated
by ‚Zz' on the display.
4
5.5 Timer function
Note
• When the timer function is switched on, the radio
automatically switches off after the chosen time
period.
• The display indicates an activated timer function
using the letter S and a number. The number reflects
the chosen time period (e.g. S6 = timer active,
automatic shut-off after 60 minutes).
• To check on timer status press INFO repeatedly in
order to show the relevant information on the display.
• Press SLEEP to switch on the timer function. The display
shows Sleep Timer and switches on using the standard
time period of 90 minutes.
• Press SLEEP repeatedly to choose another time period
after which the radio should switch off automatically.
• You can select from the following sequence, where the
numbers represent the possible shut-off times in minutes:
• Select the desired shut-off time by not pressing SLEEP for
at least 2 seconds. The currently displayed shut-off time is
then adopted automatically.
6. Operation of DAB/FM radio
6.1 Automatic DAB station search
The automatic DAB station search scans the DAB III
band for stations with reception. Following the search all
interference-free stations that have been found and can be
received are saved in alphabetical order.
• Press MENU to open the Tune Select menu.
• Turn SCROLL/OK ► II to chose Autoscan and press
SCROLL/OK ► II to confirm the selection.
The automatic DAB station search starts automatically and
is shown on the display by ‚Scanning...' and a progress
bar. (F2)