Teka DVL 985 B Bedienungsanleitung Seite 12

Instructions for use
You can activate or deactivate the cooker
hood by operating the functions shown in the
diagram.
Switch on the extractor fan a few minutes
before (3-5 minutes) you start to cook in order
to ensure that a steady air flow has been
established before fumes appear.
Allow the extractor fan to run for several
minutes after you have finished cooking in
order to expel all the grease from the outlet
duct. This prevents the return of grease,
smoke and smells.
Display
On / Increase fan speed
Off / Reduce fan speed
Light
Timer
Program the working time
1)Switch on the cooker hood and choose the
required aspiration speed.
2)Push 'Timer'.
3)Select the required programming time from
1 to 99 minutes by using the buttons '+' and
'-'.
4)The display will alternately show the clock
and the remaining programming time.
The maximum speed 'H' can only be selected
manually and will be changed automatically
to the second speed level after approximately
10 minutes.
Adjustment of the clock
1)Push the on/off' button for 3 seconds.
2)Adjust the hour digits by pressing '+' or '-'.
3) Push the on/off' button again.
4)Adjust the minute digits by pressing '+' or '-'.
5)After 3 seconds your settings are saved
automatically.
Filter saturation indicator "F"
•When the sign 'Saturation of the filters' is on,
the filters should be cleaned.
•After cleaning the filters, simultaneously push
"+" and "-" for at least 3 seconds whereupon
the sign will be switched off.
Cleaning and maintenance
During cleaning and maintenance
work, make sure the safety instruc-
tions are complied with.
Cleaning the hood body
•If your kitchen hood is made of stainless
steel, use proprietary cleaners mentioned in
the product instructions.
•If your kitchen hood is painted, use lukewarm
water and a neutral soap.
•Never use metallic scourers, nor abrasive or
corrosive products.
•Dry the kitchen hood using a cloth that does
not produce fibres.
•Do not use vapour cleaners.