Control Elements - Renkforce 1034067 Bedienungsanleitung

6. Control Elements

1 Output (to the water spray or water tap)
2 IP44 protected contact mains socket with cover flap (at the rear of the pressure switch) to connect a
garden pump
3 Mains cable with IP44 protective contact mains plug
4 Thread connection piece (enclosed separately to install the pressure switch on the pressure side of the
garden pump)
5 Input (connect to the pressure side of the garden pump)
6 Button „RESTART" (for restart of the pressure switch or the connected garden pump after running dry
has been recognised, too-low flow rate though the pressure switch)
7 LED „POWER ON" (lights up when the pressure switch is connected to the mains voltage)
8 LED „PUMP ON" (lights up when the pressure switch is activated and the power supply for the garden
pump is activated)
9 LED „ALARM" (lights up if the pressure switch has recognised running dry or a too-low flow rate)
20