VEVOR RLS1/4 Bedienungsanleitung Seite 8

Open jaw and pick out pipe
after pressing, be careful for
5
the sharp edge which
generates during press.
CAUTION:
1. The operation staff must have participated in professional training, and the
construction engineering company must have the corresponding construction
qualification recognized by the state.
2. Pressing tool, pressing jaw, adaptor or ring jaw are only for the corresponding
piping system and fittings. Use of other ways or modified standard accessories for
other applications may damage tools and accessories, and may even result in
personal injury.
Important information:
1). The jaw is a consumable part. When it is often used for pressing, the material
will be fatigued and cracks will occur. A heavily worn jaw is prone to breakage,
especially if it is used improperly (such as oversized fittings, skewed press, etc.) or
illegal operation.
2).Check the jaw for any breakage, cracks, or component jams and any other
unfavorable factors that compromise safety and normal operation, either
periodically or before each use. If you find any problems, please stop using them
immediately, and return them to the professional repairing manufacturer or return
to the factory for repair until the problem is solved.
3). Once you find the following phenomenon, please stop using it and replace it
with a new one!
a. the board is cracked
b. the jaw arm is cracked and deformed
- 7 -