VEVOR RLS1/4 Bedienungsanleitung Seite 10

2). After each pressing is completed, remove the impurities and dust on the
surface of the jaws, especially the gap at the bottom of the jaws; then rub the
lubricant on the surface of the jaw, especially the pin and jaws, and then put it into
the dedicated toolbox.
3). It is strictly forbidden to collide with any metal. It is strictly forbidden to contact
any jaws with any sharp object.
4). Check the jaw return spring before each use. Normally, the jaw can be easily
opened and closed by applying a finger.
5). It is recommended to check the wear of the jaw once a year .
Note: The appearance of the product is subject to the actual product
- 9 -