Rottner KEYPRO Bedienungsanleitung Seite 6

GB
USER INSTRUCTIONS
ENGLISH
(If an opening is no longer possible)
a. Plug the supplied cable on the left side
of the fitting into the USB port.
b. Place a stored finger on the fingerprint
reader.
c. A longer beep sounds and the green
5.
(maximum 2 fingerprints possible).
a. Briefly press the programming button
through the opening of the electronic
lock using the adjusting needle provided
(included at the delivery).
b. A beep sounds and the green LED flas-
hes.
c. Place the desired finger three (3) times
on the fingerprint reader.
(maximum 2 fingerprints possible).
a. Briefly press the programming button
through the opening of the electronic
lock using the adjusting needle provided
(included at the delivery).
b. A beep sounds and the green LED flas-
hes.
c. Place the desired finger three (3) times
on the fingerprint reader.
4. OPENING USING AN EXTERNAL POWER SUPPLY
SAVE A FINGERPRINT FOR THE MANAGER FUNCTION
6. SAVE A FINGERPRINT FOR THE USER FUNCTION
LED lights up.
d. The electronic lock unlocks and you
can open the door within 5 seconds.
e. Now replace batteries (see pt. 3 "
Battery Change")
d. You will hear a long beep.
e. The first fingerprint for the Manager
function is saved successfully.
f. If you want to store further fingerprints
for the Manager function (up to a total
of two [2] fingerprints), place the desired
finger on the fingerprint reader.
d. You will hear a long beep.
e. The first fingerprint for the Manager
function is saved successfully.
f. If you want to store further fingerprints
for the Manager function (up to a total
of two [2] fingerprints), place the desired
finger on the fingerprint reader.
www.rottner-tresor.com