Inhaltsverzeichnis; Safety Precautions - Mitsubishi Electric VL-100U5-E Betriebsanleitungen

Mitsubishi Lossnay Ventilator
MODEL:
VL-100U -E
5
VL-100EU
Operating Instructions
Please read these instructions thoroughly to ensure safe and
proper use.
Before proceeding with operation, please be sure to read
"Safety precautions", as it will tell you how to operate the
Lossnay ventilator properly and safely.
Do not install the unit yourself. (The safety and performance
of customer-installed units is not guaranteed.)
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or a similarly qualified
persons in order to avoid a hazard. (VL-100U
- Contact your dealer.

Safety precautions

Hazards created by mishandling and their
severity are indicated by the following markers.
Warning:
This applies to mishandling or misoperation
of the product which could lead to a fatal or
serious injury.
Caution:
This applies to mishandling or misoperation
of the product which will lead to an injury or
damage to your home, household effects, etc.
Warning
- Do not cut, damage or physically
alter the power cord
Prohibited
to unreasonable bending, pulling,
twisting or bundling.
- You could damage the cord, resulting
in fire or electric shock.
- Do not turn the Lossnay switch ON
or OFF if there is a flammable gas
leak.
- Sparks from electric contacts could
cause explosions. Open a window to
ventilate the room.
(pull cord Type)
-E
(wall switch Type)
5
-E only)
5
or subject it
*1
Contents
Safety precautions .....................1
When using the unit ...................3
Features ....................................4
Names of parts ..........................4
Before you start the Lossnay .....4
Operation ...................................5
If cold air is blowing on you .....5
Maintenance ..............................6
Troubleshooting .........................8
Specifications ............................9
After-sales servicing ..................9
- Do not disassemble the unit
in ways that require physical
Do NOT
alteration or tools.
disassemble
- Fire, electric shock or injury could result.
- Do not let the unit get wet.
- Fire or electric shock could result.
Do not expose
to water
- Do not insert or remove the power
plug with wet hands.
*1
No wet hands
- Electric shock could result.
- Use at the rated voltage.
- Fire or electric shock could result.
You must
follow the - Check that there is no dust on the
instructions
power plug
given.
- A dusty plug could cause fire from a
short circuit.
- Insert the plug
socket, making sure it is not loose.
- A loose fit could result in electric
shock or fire.
- Always shut off circuit breakers
or remove the power plug
the wall outlet before performing
maintenance work.
- Electric shock and burns could result
if power is flowing.
Eng-1
For Customer
Page
.
*1
completely into the
*1
from
*1