Intended Use; Safety Instructions - Powerfix Profi KH 4260 Bedienungsanleitung

Bicycle Hoist KH 4260
GB
IE

Intended use

Safety instructions

2
Read these operating instructions carefully before using the device for the fi rst
time and preserve this booklet for later reference. Pass this booklet on to whoever
might acquire the device at a future date.
This bicycle hoist in intended to save space and relieve the tyres during bicycle
storage.
It is not intended for use in commercial or industrial applications.
■ NEVER lift more than 20 kg with the bicycle hoist. If you do, the bicycle hoist
will be damaged and the load will fall down.
■ Check for the correct tightness of all screws before using the bicycle hoist.
■ At all times use the securing hooks for securing the load. Otherwise, the load
could crash down.
■ Do not take up a position underneath the suspended load.
■ Use the bicycle hoist only for storage purposes, not for any other purpose.
■ NEVER perform repairs on the suspended load.
■ Should the nylon cord become damaged, replace it immediately.
If you do not, it could sever.
■ Ensure that the nylon cord does not slide too fast between your hands! It
could lead to burns and abrasions!
■ The bicycle hoist may not be operated by weak persons, for example,
children. The bicycle could crash down and cause injuries.
■ Ensure that the holding hooks cannot slip from the saddle and handlebar
when raising or lowering of the bicycle.
KH 4260