Diagnostics Tab - Maximum 500 NANO SINGLE Installationsanleitung

"Set" button
After input the new "Network Name" and check the options, please click
"Set" button to change the network name of selected device. After changed
the network name to a new one, all the devices with different network name
will no longer be able to communicate or respond to you.

2.2. Diagnostics Tab

The "Diagnostics" tab shows the system information and the history of all
the devices that have been found before (Figure 4).
The upper window of Diagnostics tab shows the host computer's system
data and it shows:
• MAC Address of all NICs (network interface card)
• MAC Address and the firmware version of the 500Mbps PLC-Ethernet
Bridge device which is connected to each NIC
• Computer name
• User name
• Processor and operating system information
• Utility program version
• Versions of all the driver DLLs and libraries used
The lower window of Diagnostics tab contains the history of all remote de-
vices which have been found by the computer previously. All the devices will
be shown here, regardless of they are currently active or not. The following
information is available from the list:
• Name
• MAC Address
• Password
• Speed(Mbps)
• Last Seen
The diagnostics information displayed on the upper and lower window could
be saved to text file or print out by printers. Devices which no longer existed
in the network can be deleted using the "Delete..." button.
"Delete..." button
Select the device which is no longer existed in the network by clicking its
record first, then click this button to delete the record.
15
English