lighted then click the "Enter Password" button, and the "Enter Password"
dialog box will show up (Figure 3). The selected device's MAC address is
shown in the dialog box. After entering the password, click "OK" button.
Figure 3: Set Device's Password
"Scan" button
The "Scan" button is used to search for the 500Mbps PLC-Ethernet Bridge
devices connected to your logical network immediately. By default setting, it
will automatically scan every 10 seconds and updates the display lists.
"Security"
When rolling out of factory, every 500Mbps PLC-Ethernet Bridge device car-
ries a default logical network name: "HomePlugAV". The "Security" group
provides functions to manage this logical network name and create private
network.
You can change the local device's network name by check the "Set local
device" box. And/Or change the remote device's network name by check
the "Set all remote devices whose Password has been entered" box. Please
fill in each remote device's password in advance following the instructions in
"Enter Password" button.
14
English